WorkPro W159007A - Cleaning and Maintenance; Cleaning Overview; Storage and Transportation; Storage

Part number:
Protection:
Idle revolutions:
Diameter of cutting area:
Noise output level (L ):
Noise pressure level(L ):
Vibration:
Max. operating duration with
a full battery:
Battery charger
Rated voltage:
Rated power:
Charge voltage:
Charge current:
Protection:
Battery pack
Battery pack type:
Rated voltage:
Capacity:
Charging time:
WA
PA
W159007A
class III
9000 min
250 mm
88,52 dB(A)
(K = 3 dB(A))
84,7 dB(A)
(K = 3 dB(A))
< 2,1 m/s²
(K = 1,5 m/s²)
20 min
200-240V~, 50/60Hz
70 W
20V
2,4 A
class II
Li-Ion
maximum 20 V
nominal 18 V
2000 mAh
60 min
-1
Switching off: Release the on-off switch (1).
6. Cleaning and maintenance
Danger! Risk of injury!
Remove the battery pack before conducting any work
on the device.
Cleaning and maintenance overview
Note: Clean unit immediately after every use. Dried
grass remains are very hard, and are very difficult to
remove.
If necessary
What?
Cleaning the device
How?
Wipe the unit with a damp cloth.
7. Storage, transportation
Storage
Store the tool in a dry and well ventilated place.
Transportation
When dispatching, try to use the original packaging,
if possible.



8. Technical data
GB
10