Operating Instructions–VAG 1761/1
Compressed air gun
For processing Spray-on seam sealant D 476 KD7 A3 and other 310 ml cartridges
Service
Keep the body of the gun free from material remains.
Do not use aggressive solvents for cleaning.
Always keep the thread of the tube clean and occasionally
grease.
Safety
Prior to using the compressed air gun, the fitting of the
union nut should be checked. Tighten if necessary. Only
change cartridges with the air supply is disconnected!
Note
The details given comply with the current level of
development. They are not claimed to be comprehensive.
The best way to avoid potential errors is to make your own
trials. No liability can be accepted for errors. Changing
the particulars of application, method and materials require
the application conditions to be adapted accordingly.
Do not direct the compressed air gun at people!
Use only undamaged cartridges!
Tool and equipment numbers, pictures, descriptions and specifications are subject to change without notice.
Please contact your EQS specialist at 1-800-892-9650 for the latest authorized updates of tools and equipment.
Text, illustrations and/or specifications in this brochure are based on information available at the time of printing. May not be reproduced or translated in whole or in part without the
written consent of Volkswagen of America, Inc. Volkswagen reserves the right to alter any part of this program and its equipment or technical specifications at any time.
All rights r
eserved.
©
2007 Volkswagen of America, Inc.
Distributed b
y
:
Volkswagen of America, Inc.
To Previous Page
Loading...