Workshop WS0255VA User Manual

14
Problem Cause Remedy
Vac will not pick up dirt 1. Clogged Filter 1. Clean or replace Filter Bag
Bag. (follow instructions on page 12).
2. Clogged Hose. 2. Remove Hose and clear debris.
3. Air leak. 3. Make sure Powerhead is
securely attached to Drum.
Vac will not run 1. No electricity. 1. Make sure electrical outlet has
voltage. (A qualified electrician
may need to be contacted).
Replacement Filter Bags are available
where you purchased your Vac.
The Stock Number is WS01025F.
WARNING:
If any of the powerhead assembly parts should become detached or broken,
exposing motor or any other electrical components, operation should be
discontinued immediately to avoid personal injury or further damage to the
vacuum. This vacuum has no user serviceable parts.
!
TROUBLESHOOTING
REPLACEMENT FILTER BAG
SP7102 WS0255VA WORKSHOP.indb 14 7/10/19 10:57 AM

Workshop WS0255VA Specifications

General

Brand	Workshop
Model	WS0255VA
Category	Vacuum Cleaner
Language	English