Workshop WS0301VA User Manual

8
CORD, HOSE & ACCESSORY STORAGE
1. Your Vac has a convenient area to
store your power cord and Vac hose.
2. Wrap the power cord around the top of
cord wrap knobs on the back of the Vac
and attach the end of the plug to the
cord.
3. Wrap the hose over the top of the Vac
as shown and secure underneath
handle.
4. For additional accessory storage, slide
the accessory (sold separately) over
the accessory storage clips located at
the back of the handle of the Vac.
Power
Cord
Dust Pan
Feature
Accessory Storage
Clip (2)
Cord Wrap
Knob (2)
Expandable
Hose
Accessory
Storage Clip (2)
Cord Wrap
K
nob (2)
Hose
Storage
*Dusting Brush
Accessory
5. The car nozzle is attached to the hose
and stored in the dust pan feature
located on the side of the drum (see
image to the right for correct orientation
of car nozzle).
Dust Pan
Car
Nozzle
*Dusting brush accessory sold
separately.
SP6829 Workshop 3 GALLON 7/27/12 3:14 PM Page 8

Workshop WS0301VA Specifications

General

Brand	Workshop
Model	WS0301VA
Category	Vacuum Cleaner
Language	English