Closing the ladder
14
1. Hold the ladder upright so that it is standing on the front two support feet
7
.
2. Open the ladder by pulling the supports
4
all the way back from the rails
2
.
3. Firmly push the platform
3
downwards so that it sits securely on the top
lateral brace
9
(see Fig.B).
Make sure that the locking lever
10
rests firmly on the top lateral brace
(see Fig. C) and the securing strap
6
is fully stretched (see Fig. D).
The ladder is now positioned on all four support feet
5
and
7
. The
platform and the rungs
8
have now been set up securely and can be
stepped on.
You have successfully set up the ladder (see Fig.A).
Use the storage tray
1
to store small parts (e.g. screws)
(see Fig.E).
Closing the ladder
CAUTION!
Risk of crushing!
You could crush your fingers when closing the ladder.
− Make sure that you take hold of the rails and supports
when closing the ladder.
1. Push downwards the locking lever
10
(see Fig. F), and lift up the
platform
3
from the top lateral brace
9
.
2. Tilt the ladder forward so that it rests on the front support feet
7
.
3. Close the ladder completely by pulling the supports
4
towards the rails
2
.
You have successfully closed the ladder.
To Next Page
Loading...