15
First use
Assembling the cabinet
Risk of damage!
Improper handling of the cabinet may result
in damage to the cabinet or other property.
− Assemble the cabinet on a flat, even, and
dry surface.
− Use caution when assembling the cabinet
and follow the instructions as written in
this user manual.
1. Insert the side panels to bottom .
Insert the base feet , , and to
bottom .
2. Insert the back panel to the rails of the
side panels , ensuring it stays in position.
3. Insert the connections to the back panel
and to the side panels .
4. Insert the side panels to the connections
and .
5. Insert the back panel to the two rails
of the side panels , ensuring it stays in
position.
6. Insert the magnet on the back side of the
shelf and fix it with 2 small screws by
using a screwdriver.
7. Insert the shelves following the
instructions of the enlarged detail drawings
until the end. Position the shelf with the
magnet on the third position counting bottom
up.
8. Insert parts , and on parts .
9. Insert the metallic plates to the upper
panels of the doors and fix the plates with the
small screws by using a screwdriver.
10. Left door: make holes by turning the screws
clockwise with a screwdriver. Insert the
handle to the door and fix the handle
with the screws by using a screwdriver. Be
careful to drill holes on the call out only.
11. Right door: make holes by turning the screws
clockwise with a screwdriver. Insert the
handle to the door and fix the handle
with the screws by using a screwdriver. Be
carefulv to drill holes on the call out only. The
plastic bag contains two additional screws:
Risk of injury!
Improperly secured cabinet may tip over and
cause injury.
− Make sure all parts are securely assembled.
− Secure the cabinet to a wall using four
screws (not included).
− Do not stand on the shelves.
Risk of damage!
Improper handling of the cabinet may result
in damage to the cabinet or other property.
− Place the cabinet on a flat, even, and dry
surface.
− Do not place the cabinet on soft ground.
− Do not use the cabinet if any of the
parts are cracked, broken, damaged, or
deformed. Replace damaged parts only
with suitable original spare parts.
− Keep the cabinet away from hot surfaces
(e.g. wood burning stove).
First use
Checking the cabinet and package
contents
Risk of damage!
Be cautious when opening the packaging
with a sharp knife or other pointed object, to
prevent damaging the cabinet.
1. Take the individual parts of the cabinet out of
the packaging.
2. Check to make sure all parts are included.
3. Check whether the individual parts of the
cabinet are damaged. If so, do not assemble
or use the cabinet. Contact the manufacturer
via the service address indicated on the
warranty card.
CAUTION!
NOTICE!
NOTICE!
NOTICE!
B
B
B
B
J
D
D
H1 H2 P
K
C
L
L
U
U
I
I
I
B
N
M
NM
00
00
00
W1 W2 W3
A
A
W4
I
To Next Page
Loading...
Need help?
General