Removing the wash brush
1. Stop the washer and move the ON/OFF switch
5
to OFF.
2. Push the trigger
13
until the pressure in the washer has been
released.
3. Push the wash brush
17
slightly in the direction of the
spray gun
11
and turn the wash brush anticlockwise at the
same time.
4. Remove the wash brush.
Using the cleaner
NOTICE!
Risk of damage!
Using cleaners other than those recommended by the manufacturer
can affect the safety of the washer.
− Only use cleaners supplied or recommended by the
manufacturer.
WARNING!
Risk of chemical burns!
Cleaners that come into contact with the skin, eyes or mucous
membranes can cause burns.
− Do not allow the cleaners to come into contact with the skin,
eyes and mucous membranes.
− In the event of contact with the cleaners, immediately flush
the applicable areas with plenty of clean water and consult a
physician if necessary.
Switch off the washer before adding the cleaner to the
washer.
To Next Page
Loading...
Need help?
General
