EasyManua.ls Logo

Workzone WZTS 1701 - Page 4

Workzone WZTS 1701
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
d
1300 922 271
service.australia@einhell.comAFTER SALES SUPPORT
WZTS 1701
09/2013
m Caution!
When using the equipment, a number of safety precautions must be
observed to avoid injuries and damage. Please read the complete
operating instructions and safety information with due care. Keep these
operating instructions in a safe place so that the information is available
at all times. If you give the equipment to any other person, hand over
these operating instructions and the safety information as well. We
cannot accept any liability for damage or accidents which arise due to
failure to follow these instructions and the safety information.
m WARNING
Read all the safety information and instructions. Failure to adhere to
the safety information and instructions set out below may result in
electric shock, fire and/or serious injury.
Keep all the safety information and instructions in a safe place for
future use.
Important: Laser radiation
Do not look into the beam
Laser class 2
1Safety information
CAUTION ! – LASER RADIATION !
Do not look into the beam!
Laser specification
Laser class 2
Ï: 650 nm; P
0
: <1 mW
In accordance with EN 60825-1:2007
WZTS_1701_AUS_SPK7.indb 4 06.05.13 11:17

Related product manuals