2. Set KS25A/49A/61A parameters;
3. Open a new MIDI project in Cubase;
4. Select KS25A/49A/61A as MIDI input and neglect output;
5. Uncheck the box – SYSEX in RECORD to validate system message. (FILE->
PREFERENCES-> MIDI-> MIDI FILTER);
6. Cubase starts to record;
7. Press EDIT button to enter keyboard multi-function mode, and then press
UPLOAD, KS25A/49A/61A enters into system message upload mode. LED
displays SEu. After upload completes, LED displays don.
8. Cubase stops recording.
9. In Cubase, select MIDI->OPEN LIST EDITOR to find received system message;
press COMMENT to open system message window and use EXPORT to save
the message in *.SYS format.
² From computer to KS25A/49A/61A (DOWNLOAD)
1. Use USB cable to connect computer and KS25A/49A/61A;
2. Open a new MIDI project in Cubase;
3. Select KS25A/49A/61A as MIDI output;
4. Export saved system message file (*.SYS) into Cubase.
5. Press EDIT button to enter keyboard multi-function mode, and then press
DOWNLOAD, KS25A/49A/61A enters into system message download mode. LED
displays SEd.
6. Cubase starts to playback and transmit system message to KS25A/49A/61A;
7. LED displays don after KS25A/49A/61A finishes receiving correct system
message.
8. Use SNAP SHOT function together to transmit download setting message to
sequent device.
l System Message Window Style. E.g. Cakewalk
Operate KS25A/49A/61A in the same way as under Record Style, only different
operation in sequencer software.
² From KS25A/49A/61A to computer (UPLOAD)
1. Use USB cable to connect computer and KS25A/49A/61A;
2. Set KS25A/49A/61A parameters;
3. Open a new MIDI project in Cakewalk;
4. Select KS25A/49A/61A as MIDI input and neglect output;
5. Open system message window: VIEW->SYSX; select a BANK and↓; select YOU
START DUMP ON INSTRUMENT and then Cakewalk enters into system message
receive mode.
6. Press EDIT button to enter keyboard multi-function mode, and then press
UPLOAD, KS25A/49A/61A enters into system message upload mode. LED
displays SEu. After upload completes, LED displays don.
7. Use SAVE in Cakewalk to save received message in *.SYS format.
² From computer to KS25A/49A/61A (DOWNLOAD)
1. Use USB cable to connect computer and KS25A/49A/61A;；
2. Open a new MIDI project in Cakewalk;
To Next Page
Loading...
