Need help?Do you have a question about the worldpay Axium DX8000 and is the answer not in the manual?
General| RAM | 2 GB |
|---|---|
| Connectivity | Wi-Fi, Bluetooth, 4G LTE |
| Processor | Quad-Core Cortex A53 |
| Storage | 8GB |
| Operating System | Android |
| Ports | USB Type-C, Audio Jack |
| Card Reader | EMV, NFC, MSR |
| Touchscreen | Yes, capacitive multi-touchscreen |
| Camera | 5 MP Rear |
| Payment Methods | Contactless |
| Security | PCI PTS 5.x |
This guide describes how to configure Axium DX8000 device settings and test application connectivity.
Confirms listening ports and active data connections are added to network boundary whitelists to permit traffic.
Adjust terminal device settings to meet requirements before using MultiPay POS SDK for Passthrough mode.
Steps to connect the Axium DX8000 device to a Wi-Fi network, including password usage.
Configure date and time settings, including using network-provided time and time zone.
Select the appropriate screen timeout setting to meet user needs, with options ranging from 15 seconds to Never.
Illustrates and labels the components of the DX8000-BASE-W2 docking base, including ports and buttons.
Describes the default operating mode where the base acts as a router, managing IP addresses via DHCP.
Explains Bridge Mode where the base connects devices directly to the local router, making IPs visible.
Steps to pair the Axium DX8000 device with the docking base using the pairing button and Wi-Fi credentials.
Connects the Axium DX8000 device to the docking base via Wi-Fi settings, ensuring Ethernet connection to the network.
Scan the docking base barcode and select 'Only use base Wi-Fi' for connection.
Access the docking base administrator application via web browser using its IP address and default password.
Modify the Wi-Fi network passwords for both 2.4 GHz and 5 GHz networks for enhanced security.
Change the administrator password to secure access to the base's management settings.
Enable hidden SSID for the 2.4 GHz WLAN to prevent unauthorized discovery of the docking base.
Procedure to restore the docking station to factory settings using the RESET button.
Addresses common questions regarding the docking station, including connection issues and web interface access.
Instructions for permanently mounting the DX8000 terminal device using a fixing structure and screws.
Steps to permanently mount the DX8000-BASE-W2 docking station using a base-fixing structure and screws.
Shows expected display messages for Bluetooth connection status and readiness for transaction requests.
To Next Page
