Worldwide Cyclone 360 User Manual

CYLONE 360 MANUAL
The WorldWide CYCLONE 360 is designed and specifically made for the Tattoo Industry. The full turning power of the
Cyclone 360 allows you to deliver a clean and stable voltage. The full switching regulated power supply delivers the ability
to fine tune your machine to the perfect setting. The LCD Meter accurately, clearly, continuously displays the four major
electronic measurements from a tattoo machine: SPEED, FOLLOW THROUGH, DUTY CYCLE, and VOLTAGE. Our
Power adapter allows you to use this Power Supply World Wide. Cord Sets available for every country (Upon request).
Power: DC 24V (110V-240V Can be used WorldWide)
Dimension: 5.5”(Length) 6.5”(Width) 2.5”(Height)
Weight: 1lb

Worldwide Cyclone 360 Specifications

General

Input Voltage	100-240V AC
Output Voltage	12V DC
Output Current	30A
Power	360W
Efficiency	85%
Input Frequency	50/60Hz
Protection Features	Over Voltage, Over Current, Short Circuit, Over Temperature

Summary

Cyclone 360 Device Overview

Power Connectivity

Details the AC power input and output connections for the unit.

Tattoo Machine Interface

Ports for connecting the tattoo machine clip cord and foot switch.

User Control Panel

Includes the LCD display, voltage knob, and power switch.

Cyclone 360 Setup and Operation

Initial Setup Procedure

Steps for connecting and preparing the power supply for use.

Understanding the LCD Display

Explanation of the four main electronic measurements displayed by the unit.