Need help?Do you have a question about the Worx Nitro WA3525 and is the answer not in the manual?
Read all safety warnings, instructions, illustrations and specifications provided.
Keep work area clean and well lit, avoid explosive atmospheres, keep children away.
Ensure proper plugs, avoid body contact with earthed surfaces, protect from rain/wet.
Stay alert, use PPE, prevent unintentional starting, dress properly.
Use correct tool, do not force, maintain tools, keep handles dry.
Recharge with specified charger, use designated packs, avoid damage/heat.
Have tool serviced by qualified person, never service damaged battery packs.
Do not dismantle, expose to heat/fire, short-circuit, or subject to mechanical shock.
Removing and charging the battery pack, checking battery condition.
Inserting/removing sockets and assembling the belt hook.
Switch lock, forward/reverse rotation control, variable speed control.
Adjust speed with trigger pressure for higher/lower speed operation.
Warning against long periods at low speed due to heat production.
LED activation before use, automatic turn-off, system protection features.
Ambient temperature ranges for tool use, storage, and battery charging.
General| Voltage | 20V |
|---|---|
| Chuck Size | 1/2 inch |
| Battery Type | Lithium-ion |
| Battery Capacity | 2.0 Ah |
| Power Source | Battery |
| Type | Cordless Drill/Driver |
| Speed | 2-speed gearbox |
To Next Page
