6
EN
COMPONENT LIST
1. FEEDING CUP
2. FEEDING CUP COVER
3. DUAL FUNCTION TRIGGER
4. TAIL ADJUST SCREW
5. POWER CORD CONNECTION
6. COMPRESSOR
7. NOZZLE
Not all the accessories illustrated or described are included in standard
delivery.
TECHNICAL DATA
WX742L WX742L.X *
Rated voltage
20 V Max. **
Pressure value 14-18 PSI (0.10 -0.12 MPa)
Nozzle size 0.4 mm
Machine weight 0.62 lbs (280 g)
* X may be followed by one or two characters. All models are the same except model
number and trademark. The suffix in models may be number from “1” to “99” or English
letter “A” to “Z” or ‘’M1’’ to ‘’M9’’ which means different package or the various of acces-
sories packed in the package.
** Voltage measured without workload. Initial battery voltage reaches maximum of 20
volts. Nominal voltage is 18 volts.
Category Model Capacity
20V Hub/HubX
WA7150
Input: 20 V 10 A Max.
Output: 20 V 10 A Max.
WA7151
Input: 20 V 10 A Max.
Output 1: 20 V 10 A Max.
Output 2: 5 V 2 A (USB port)
Only use the appropriate accessories intended for this tool. Accessory information can
be found on the product packaging, at a Worx dealer or on our website at www.worx.com.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.
To Next Page
Loading...
Need help?
General
