11
EN
COMPONENT LISTS
1. LONG NOZZLE
2. AIR OUTLET
3. BLOWER HOUSING
4. ONOFF SWITCH
5. SHORT NOZZLE AVAILABLE ON WORX.COM
6. SHARP NOZZLE AVAILABLE ON WORX.COM
7. BRUSH ADAPTER AVAILABLE ON WORX.COM
8. AIR BLADE NOZZLE AVAILABLE ON WORX.COM
*Not all the accessories illustrated or described are included in standard
delivery.
TECHNICAL DATA
WX747L WX747L.X**
Rated Voltage
20 V Max***
No load speed 32000 r/min
Max Wind Speed 30 m/s
Runtime (2.0 Ah) 45-60 mins
Machine weight (bare tool) 0.46 lbs (210 g)
** X may be followed by one or two characters. All models are the same except
model number and trademark. The suffix in models may be number from “1” to
“99” or English letter “A” to “Z” or “M1” to” M9” which means different package or
the various of accessories packed in the package.
***Voltage measured without workload. Initial battery voltage reaches maximum
of 20 volts. Nominal voltage is 18 volts.
Category Model Capacity
20V Hub/HubX
WA7150
Input: 20 V 10 A Max.
Output: 20 V 10 A Max.
WA7151
Input: 20 V 10 A Max.
Output: 20 V 10 A Max.
Or Output: 5 V 2 A (USB port)
Only use the appropriate accessories intended for this tool. Accessory information can
be found on the product packaging, at a Worx dealer or on our website at www.worx.com.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.
To Next Page
Loading...
Need help?
General
