9
Oscillating Multi-Tool EN
APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and application. The
workpiece must be clamped tightly before it is cut.
Pic Description Application
Sawing
Universal Metal/Wood End
Cut Blade
Wood, plastic, fiberglass, nails,
non-ferrous metals, thin sheet metal,
hardened fillers.
Standard Wood End Cut
Blade
Wood, plastic, drywall.
Precision Wood Cut Blade Wood, soft plastics.
HSS Semicircle Saw Blade
Thin wood, plastic, fiberglass,
non-ferrous metals, thin sheet metal,
hardened fillers, window glazing.
Sanding
Sanding Pad (Perforated) Wood, plastic, hardened fillers.
Sanding Finger Pad Wood, plastic, hardened fillers.
Rasping
Triangular Carbide Grit
Rasp
Wood, hardened adhesives, thin set,
masonry.
Carbide Rasp (Finger
Shaped)
Wood, hardened adhesives, thin set,
masonry.
Removing
grout
Carbide Grit Semicircle
Saw Blade
Grout, porous concrete, masonry.
Diamond-Coated
Semicircle Saw Blade
Ceramic and stone tile, backerboard.
Scraping
Rigid Scraper Blade
Old paint, hardened adhesives, caulk, carpet.
Flexible Scraper Blade
Elastic sealants, paint, adhesive residues,
carpet.
We recommend that you purchase your accessories listed in the above list from the same store that sold you the
tool. Use good quality accessories marked with a well-known brand name. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip removal.
The saw blade lasts longer if the wear is distributed evenly. To ensure an even distribution, loosen the saw blade,
rotate it and retighten firmly.
Cut/Sand with a constant movement and light pressure.
Heavy pressure does not increase the cut/removal rate – the accessory merely wears faster.
To Next Page
Loading...
Need help?
General
