What to do if my Worx WX255L battery will not charge?
If your Worx Power Tool battery isn't charging, first ensure the charger is properly plugged into a working outlet. Also, check the surrounding air temperature; if it's too hot or too cold, move the charger to a location with a more suitable temperature.
Why the switch of my Worx WX255L cannot be pressed?
If the switch on your Worx Power Tool cannot be pressed, it might be because the Forward/Reverse switch is in the middle position.
What to do if the Bit Cartridge of my Worx WX255L Power Tool will not rotate when Cover slides?
If the Bit Cartridge of your Worx Power Tool will not rotate when the Cover slides, ensure that the cover is fully open.
Keep work area clean and well lit; avoid explosive atmospheres; keep children/bystanders away.
Use correct plugs, avoid grounded surfaces, protect from rain/wet conditions, do not abuse cord.
Stay alert, use PPE, prevent unintentional starting, remove keys, maintain balance, dress properly.
Do not force tool, use correct tool, ensure switch works, disconnect power before adjustments.
Maintain tools, keep cutting tools sharp, use tool correctly, secure workpiece.
Recharge with specified charger, use designated battery packs, keep battery away from metal.
Service by qualified personnel, do not charge when not in use.
Hold by insulated gripping surfaces when near hidden wiring to avoid electric shock.
Product may expose to chemicals; complies with Canadian ICES-001 and FCC Rules.
Warning: Risk of fire and burns. Do not disassemble, heat, or incinerate battery.
Dispose of used batteries promptly, keep separate, keep out of reach of children, do not ingest.
Caution against mistreatment, use correct battery, recycle battery, avoid short-circuiting.
Use specified charger, remove battery when not in use, prevent unintentional starting.
Do not stare into tool holder; read manual for injury prevention.
Standard safety icons for warnings, insulation, PPE, battery recycling, and usage.
Lists key components like Slide Cover, Screw Holder, Chuck, Bit Cartridge, and Flexible Shaft.
Not all illustrated accessories are included in standard delivery.
Lists charger specs, battery capacity, tool speed, torque, weight, and charging time.
Details accessories included for WX255L and WX255L.2 models.
Charging the battery, inserting/removing bit cartridge, screw holder, and flexible shaft.
Forward/Reverse/Lock, selecting bits, tightening/loosening screws, operating switch, LED indicator.
Function enabling manual tightening/loosening when the driver is out of power.
Tool requires no lubrication; clean with dry cloth; keep ventilation slots clean.
Addresses battery charging, switch pressing, driver stopping, and bit cartridge rotation problems.
Do not load or transport damaged package; provides contact info for assistance.
General| Voltage | 20V |
|---|---|
| Speed | 0-400/0-1500 RPM |
| Battery Type | Lithium-Ion |
| Power Source | Battery |
| Integrated LED light | Yes |
| Battery Capacity | 2.0 Ah |
| Type | Cordless Drill Driver |
To Next Page
