To Next PageTo Next PageWhat to do if my Worx WX543 Power Tool suddenly stops?
If your Worx Power Tool stops suddenly, it may be due to overload or high battery temperature. Immediately relieve the load on the machine and allow it to cool for about 30 seconds by running it without any load. Another cause might be low battery capacity. If that's the case, charge the battery pack.
General| Handle type | Top handle |
|---|---|
| Product color | Black, Orange |
| Orbital action | - |
| Adjustable speed | Yes |
| Idle stroke rate (max) | - spm |
| Power source | Battery |
| AC input voltage | 18 V |
Weight and Dimensions| Weight | - g |
|---|
Keep work area clean, well-lit, and free of flammable materials. Avoid distractions.
Ensure proper grounding, avoid wet conditions, and use outdoor-suitable extension cords.
Stay alert, wear protective equipment, prevent unintentional starting, and dress properly.
Use correct tool, do not force, disconnect power before adjustments, and store properly.
Grip securely, use clamps for workpiece support, and ensure stability for control.
Use specified chargers, avoid short-circuiting, and protect from heat and mechanical shock.
