Need help?Do you have a question about the Worx WX106L and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| Chuck Size | 1/4 inch |
| Max Torque | 115 in-lbs |
| Speed Settings | 2 |
| Battery Type | Lithium-Ion |
| Weight | 2.2 lbs |
| No Load Speed | 0-400/0-1300 RPM |
| Torque Settings | 15+1 |
| Type | Cordless Drill |
Ensures safe operation by maintaining a clean and well-lit workspace, keeping bystanders away.
Covers precautions for plugs, avoiding earthed surfaces, and protecting against water ingress.
Focuses on operator alertness, PPE, preventing unintentional starts, and proper dress.
Guidelines for proper usage, maintenance, storage, and care of the power tool.
Instructions for charging, using, and storing the battery pack safely.
Recommendations for servicing and maintaining the power tool with qualified personnel.
Covers essential safety for various operations like grinding, sanding, and cutting.
Explains kickback and provides precautions to avoid it during operation.
Specific warnings and guidelines for grinding and abrasive cutting-off operations.
Guidelines for safe use of wire brushes, including bristle hazards and run-in procedures.
Covers precautions for battery dismantling, short-circuiting, heat exposure, and proper charging.
Symbols indicating the need to read the manual and general warnings.
Symbols indicating the requirement for eye, ear, and dust mask protection.
Symbols related to battery disposal, burning prohibition, and Li-Ion battery recycling.
Identifies key parts of the rotary tool with numerical labels.
Lists key technical data including voltage, speed, capacity, weight, and dimensions.
Details the accessories available for the rotary tool and recommendations for purchase.
Illustrates the process of assembling the collet and chuck for accessory attachment.
Shows the installation of a grinding head accessory.
Illustrates felt rod core installation for polishing and cleaning.
Depicts the steel wire flat brush for cleaning operations.
Shows various engraving, drilling, and cutting bits for different tasks.
Illustrates the correct method for installing a cutting blade.
Steps to take before operating the tool, including battery check and charging.
Guidance on mounting accessories and securing them using the spindle lock.
Instructions for turning on, adjusting speed, and handling the tool during use.
Demonstrates correct grip techniques for precision and rough machining.
Details which accessories are used for specific functions like grinding, sanding, and cutting.
Information on tool maintenance, cleaning, and storage.
Specifies ambient temperature ranges for tool operation and battery charging.
Table detailing recommended speed settings for various accessories and materials.
Instructions and notes on installing and removing accessories like chucks and spanners.
To Next Page
