To Next PageTo Next Page
Need help?Do you have a question about the Worx WX352 and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| Chuck Size | 13mm |
| Battery Type | Lithium-Ion |
| Drilling Capacity in Wood | 40 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Masonry | 16 mm |
| Type | Cordless Drill |
| Battery Capacity | 2.0 Ah |
| Impact Rate | 32400 bpm |
| Torque Settings | 15+1 |
Guidelines for maintaining a clean, well-lit, and safe work environment, avoiding hazards like dust and distractions.
Precautions regarding plugs, grounding, water exposure, and cord usage to prevent electric shock.
Advice on staying alert, using protective equipment, preventing unintentional starting, and proper attire.
Guidance on using the correct tool, maintaining it, and proper storage to ensure safe operation.
General safety advice for drilling operations, including ear protection and handling accessories.
Tips for using long drill bits safely, focusing on speed, pressure, and avoiding bending.
Explanation of common symbols used in the manual for operation and safety, such as drilling modes and protective gear.
Specifications for maximum drilling capacity in various materials and the weight of the tool.
Measured sound pressure and sound power levels of the tool during operation.
Declared vibration emission values for drilling into metal and impact drilling into concrete.
Defines the machine's intended applications, including impact drilling in masonry and drilling in wood, metal, and plastic.
Instructions for checking the battery charge level, especially for tools with an indicator light.
Procedure for safely removing the battery pack from the tool.
Steps for charging the battery pack using the appropriate charger.
Procedure for safely installing the battery pack into the tool.
Detailed steps for adjusting and securing the chuck, including removing and inserting bits.
Instructions for attaching the belt hook and bit clip to the tool.
Guidance on using the forward/reverse switch, including a warning about changing direction while rotating.
Information on selecting between the two available speed settings for different applications.
How to adjust the torque setting ring for screwdriving, drilling, and hammer drilling modes.
Instructions for operating the trigger switch and understanding the LED light indicator.
Troubleshooting steps for when the drill does not respond to the switch activation.
Guidance on verifying torque settings and drill operation modes when drilling is interrupted.
Instructions for correctly orienting the battery for insertion into the charger.
Explanation of factors affecting battery life and tips for maintaining performance.
