APPLICATION
WARNING: The sawing teeth are very sharp. Do not touch during mounting and
application.
The workpiece must be clamped tightly before it is cut.
Pic Description Applicatio n
Sawing
Bi-Metal
Metal/Wood End Cut Blade
Wood, plastic, fiberglass,
nails, non-ferrous metals, thin
sheet metal, hardened fillers.
Standard Wood End
Cut Blade
Wood, plastic, drywall.
Precision Wood Cut Blade
Wood, soft plastics.
HSS Semicircle Saw
Blade
Thin wood, plastic,
fiberglass,
non-ferrous metals, thin
sheet metal, hardened fillers,
window glazing.
Sanding
Sanding Pad
(Perforated)
Wood, plastic, hardened
fillers.
Sanding Finger Pad
Wood, plastic, hardened
fillers.
Rasping
Triangular Carbide Grit
Rasp
Wood, hardened adhesives,
thin set, masonry.
Carbide Rasp (Finger
Shaped)
Wood, hardened adhesives,
thin set, masonry.
Removing
grout
Carbide Grit Semicircle
Saw Blade
Grout, porous concrete,
masonry.
Diamond-Coated
Semicircle Saw Blade
Ceramic and stone tile,
backerboard.
Scraping
Rigid Scraper Blade
Old paint, hardened
adhesives, caulk, carpet.
Flexible Scraper Blade
Elastic sealants, paint,
adhesive residues, carpet.
NOTE: When plunging and sawing use a slight pendulum motion, to allow sufficient chip
removal.The saw blade lasts longer if the wear is distributed evenly. To ensure an even
distribution, loosen the saw blade, rotate it and retighten firmly.Cut/Sand with a constant
movement and light pressure. Heavy pressure does not increase the cut/removal rate – the
accessory merely wears faster.
To Next Page
Loading...
