Battery Charger EN
76
MAINTENANCE
TROUBLESHOOTING GUIDE – Problems
and Solutions
Problem
Possible
Cause
Solution
Green ON,
but battery
does not
charge
when
inserted
into the
charger
Battery is
not inserted
into the
charger
properly
Slide the battery
into the charger
properly
Battery
contacts
are not
connecting
properly
Remove any
debris from the
battery contacts
(try inserting and
removing the
battery several
times) or replace
the battery
Defective
Battery
Replace the
battery
No light
(Neither
the red or
green light
illuminates)
Battery
charger
plug is not
properly
connected
to power
supply
Insert the main
plug of battery
charger fully into
the electrical
outlet
Electrical
outlet,
battery
charger
cable, or
battery
charger is
defective
Check the
voltage; have the
battery charger
checked by our
service agent
or a similarly
qualified person
1. I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
1) Check if the charger and the battery pack
are specifically designed for working
together.
2. REASONS FOR DIFFERENT CHARGING
TIMES
The charging time can be affected by many
reasons which are not defects in your product.
1) If the battery pack is only partly discharged
it may be re-charged in less than 3 hours.
2) If the battery pack and ambient
temperature are very cold then re-charging
may take more hours.
3) If the battery pack is very hot you must
remove your battery pack from the charger
and allow your battery pack to cool first to
ambient temperature and then recharging
can be started.
NOTE: The charging time can be affected by
many reasons which do not indicate defects in
your product.
Remove the plug from the electrical
socket before carrying out any
adjustment, servicing or maintenance.
Your tool requires no additional lubrication
or maintenance. Never use water or chemical
cleaners to clean your tool. Wipe clean with
a dry cloth. Always store your tool in a dry
place.
To Next Page
Loading...
Need help?
General
