EasyManua.ls Logo

Worx WG441E - Operation and Maintenance Procedures; Assembly and Operating Instructions; Cleaning and Maintenance Advice; Environmental Protection Guidelines

Worx WG441E
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1312
Patio-Brush EN
1312
Attaching the garden hose to the brush
NOTE: After the garden hose is attached,
check the connection by gently pulling
upon the garden hose. It should not be
pulled off.
See Fig.
F1, F2
OPERATION
Starting
WARNING! Do not start or operate
the machine if others are in the
area! Never lift the device off the ground
during operation, as there is danger of
entanglement !
See Fig. G
Adjusting the speed See Fig. H
Water supply
WARNING! Do not connect the
machine to water supplies that
are dirty, rusty, muddy, or corrosive.
See Fig. I
Cleaning
WARNING: Make sure that the
surface to be cleaned is free from
debris e.g. stones, screws etc., which
could be flung up.
Never put your hands or feet near to the
rotating brushing equipment!
Cleaning with Soft nylon bristles See Fig. J1
Cleaning with Hard nylon bristles See Fig. J2
Cleaning with Hard nylon joint cleaning
brush
See Fig. J3
Cleaning with Metal / hard nylon joint
cleaning brush
See Fig. J4
ENVIRONMENTAL
PROTECTION
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
On behalf of Positec declare that the product
Description Battery-operated multifunctional brush
Type WG441E WG441E.9 (441 - designation of
machinery, representative of Battery-operated
multifunctional brush)
Function Cleaning ground surface
Complies with the following Directives:
2006/42/EC, 2014/30/EU, 2011/65/EU&(EU)2015/863
Standards conform to
EN 60335-1, EN ISO 12100, EN 55014-1, EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2020/12/07
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

Other manuals for Worx WG441E

Related product manuals