EasyManua.ls Logo

Worx WG441E - Technical Specifications and Components; Component Identification; Noise, Vibration, and Technical Data

Worx WG441E
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
WG441E WG441E.X
Patio-Brush
COMPONENT LIST
1. SPEED CONTROL BUTTON
2. ON/OFF SWITCH
3. BATTERY PACK RELEASE BUTTON *
4. BATTERY PACK *
5. HOSE RETAINING CLIP
6. LOWER SHAFT
7. WATER SUPPLY SWITCH
8. DRIVE ARM (REMOVABLE)
9. HARD NYLON BRISTLES (WA0291)
10. SAFETY GUARD
11. BRUSH COVER LOCKING BUTTON
12. HOSE ADAPTOR
13. UPPER SHAFT
14. HANDLE LOCKING KNOB
15. AUXILIARY HANDLE
16. SOFT NYLON BRISTLES (WA0290) *
17.
HARD NYLON JOINT CLEANING BRUSH
(WA0292) *
18.
METAL  HARD NYLON JOINT CLEANING BRUSH
(WA0293)
19. JOINT ALIGNMENT MARK
* Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type Designation WG441E WG441E.X (441-
designation of machinery, representative of
Battery-operated brush)
WG441E WG441E.X **
Rated voltage 20 V Max.***
Max. No-load speed 700 /min
Water pressure 0.6 MPa
Rotational speed H700 /min; L500 /min
Machine weight (bare tool) 2.9 kg
** X=1-999,A-Z,M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
Category
Type Capacity
20V Battery WA3014 4.0Ah
20V Charger
WA3880 2.0A
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
= 65.2 dB(A)
K
pA
3.0 dB(A)
A weighted sound power L
wA
= 78.61 dB(A)
K
wA
3.0 dB(A)
VIBRATION INFORMATION
Vibration emission value a
h
< 2.5 m/s
2
Uncertainty K = 1.5 m/s

Other manuals for Worx WG441E

Related product manuals