20V Max Lithium Blower EN
9
Blowing
USER TIPS
• Hold the blow tube approx
8” above the ground when
operating the tool.
Use a sweeping motion from
side to side. Advance slowly
keeping the accumulated
debris/leaves in front of you.
• After blowing the debris/
leaves into a pile, it is easy to
dispose of the pile.
CAUTION!
• Do not blow hard objects
such as nails, bolts, or rocks.
• Do not operate the blower
near bystanders or pets.
• Use extra care when cleaning
debris from stairs or other
tight areas.
• Wear safety goggles or other
suitable eye protection, long
pants, and shoes.
See Fig. G
CLEANING THE TOOL
Clean the tool regularly.
WARNING! Keep your product dry.
Under no circumstances spray with
water.
• To clean the tool, use only mild soap and a
damp cloth.
• Do not use any type of detergent, cleaner or
solvent which may contain chemicals that
could seriously damage the plastic.
• Self lubricating bearings are used in
your product, therefore lubrication is not
required.
To Next Page
Loading...
Need help?
General
