9
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
ACTION
FIGURE
BEFORE OPERATION
Charging the battery pack
See Fig. A
Installing the battery pack
See Fig. B
Removing the battery pack
See Fig. C
OPERATION
Starting & Stopping
To start your light just depress on/off switch(1) marked “I”.
To stop your light just depress the on/off switch(1) marked “O”.
WARNING! Do not direct the light beam into eyes.
See Fig. D
Placing the light
WARNING! Ensure the Worklight is securely placed to prevent
falling object hazard.
Using the hook to hang the light
WARNING! Do not hang the Worklight on any electrical power cord!
See Fig. E
Using the bracket to set the light
You may use a screw to secure the Worklight in place.
See Fig. F
Using the bracket to hang the light
See Fig. G
Adjustable head
The Worklight head can be set in a variety of positions. To switch base
positions, rotate the adjusting knob to loosen the light. Adjust head to desired
position , tighten the adjusting knob.
CAUTION! Do not place hands or fingers between adjustable head and bracket
when positioning Worklight to avoid any hazard!
See Fig. H
MAINTENANCE
We recommend that you purchase your accessories listed in the above list from the same store
that sold you the tool. Refer to the accessory packaging for further details. Store personnel can
assist you and offer advice.
To Next Page
Loading...