14
3.TECHNICAL DATA
Type designation WX100L WX100L.X (1 - designation of
machinery, representative of hand hold drill)
WX100L WX100L.X**
Voltage 20V Max*
**
No load speed 0-400/0-1600/min
Number of clutch positions 20+1
Max torque 265 in-lbs (30N.m)
Chuck capacity 3/8” (10mm)
Max. drilling
capacity
Metal 3/8” (10mm)
Wood 1” (25mm)
Machine weight (Bare tool) 0.78kg (1.72lbs)
** X may be followed by one or two characters. All models
are the same except model number and trademark.
The suffix in models may be number from “1” to “999”
or English letter “A” to “Z” or “M1” to” M9” which means
different package or the various of accessories packed in
the package.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage is
18 volts
Category
Type Capacity
20V Battery
WA3525 2.0Ah
WA3575 2.0Ah
20V Charger
WA3742 0.4A
WA3881 2.0A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
4.INTENDED USE
The machine is intended for driving in and loosening
fasteners as well as for drilling in wood, metal and plastic.
5.OPERATING INSTRUCTIONS
NOTE Before using the tool, read the instruction
book carefully.
Assembly and Operation
ACTION FIGURE
BEFORE OPERATION
To Next Page
Loading...
Need help?
General
