20V Cordless Drill Driver EN
7
1. KEYLESS CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BATTERY PACK RELEASE BUTTON *
8. ON/OFF SWITCH
9. LED LIGHT
* Not all the accessories illustrated or described are included in standard delivery.
TECHNICAL DATA
WX101L WX101L.9
Voltage
20V Max*
No load speed 0-400/0-1450/min
Number of clutch positions 15+1
Max torque 265 in-lbs
Chuck capacity 3/8”
Max. drilling capacity
Steel 3/8”
Wood 1”
Machine weight 2.8 lbs 2.0 lbs
*Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.
ACCESSORIES
WX101L WX101L.9
Battery pack (WA3520)
1 /
Charger (WA3742)
1 /
Double ended bits (PH2/SL5.5)
1 1
We recommend that you purchase your accessories listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
To Next Page
Loading...
Need help?
General
