Worx WX175 User Manual

7
Lithium-Ion Brushless drill driver
Lithium-Ion Brushless hammer drill
EN
TECHNICAL DATA
Type WX175 WX175.1( 1 - designation of machinery, representative of Battery-powered Drill)
WX373 WX373.1 WX373.2 (3- designation of machinery, representative of Hammer Drill)
WX175 WX175.1 WX373 WX373.2 WX373.1
Charger voltage 100-240V ~50/60Hz
Rated voltage 20V Max**
No load speed 0-600/0-2000/min
Impact rate / 0-9600/0-32000BPM
Number of clutch position 18+1 22+1+1
Max torque 60N.m
Chuck capacity 13mm
Max. drilling
capacity
Steel 13mm
Wood 40mm
Brickwork / 16mm
Concrete / 13mm
Machine weight 1.55kg 1.83kg 1.58kg 1.85kg
** Voltage measured without workload. Initial battery voltage reaches maximum of
20 volts. Nominal voltage is 18 volts.
1. CHUCK
2. TORQUE ADJUSTMENT RING
3. TWO-SPEED GEAR CONTROL
4. FORWARD/REVERSE ROTATION CONTROL
5. SOFT GRIP HANDLE
6. BATTERY PACK *
7. BELT HOOK
8. BATTERY PACK RELEASE BUTTON
9. SIGHT LIGHT
10. ON/OFF SWITCH
11. BIT CLIP
12. BATTERY CAPACITY INDICATOR

Worx WX175 Specifications

General

Torque (max)	60 N⋅m
Number of gears	2
Torque settings	19
Idle speed (1st gear)	600 RPM
Idle speed (2nd gear)	2000 RPM
Drilling diameter in wood (max)	40 mm
Drilling diameter in steel (max)	13 mm
Reverse	Yes
Product design	Pistol grip drill
Product color	Black, Orange
Power source	Battery
Charging time	60 min
Battery voltage	20 V
Battery capacity	2 Ah
Number of batteries included	2 pc(s)

Weight and Dimensions

Weight	1550 g