level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
0
C or less.
Plan your work schedule to spread any high vibration tool use across a number of days.
accessoRies
3-5h charger 1
Screwdriver bits 17
Flat: 3,4,5,6mm 4
Cross: PZ0,PZ1,PZ2.PZ3 4
Phillips: PH0,PH1,PH2,PH3 4
Square: S1,S2 2
Torx: T10, T15 2
50mm screwdriver bit: PH2 1
Magnetic bit holder 1
We recommend that you purchase your accessories from the same store that sold you the tool. Use good
quality accessories marked with a well-known brand name. Choose the type according to the work you intend
to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer
advice.
To Next Page
Loading...
Need help?
General
