Worx WX317.2 Instruction Manual

Impact drill EN
98
HAND DRILL SAFETY
INSTRUCTIONS
1. Wear ear protectors when impact
drilling. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
3. Hold power tool by insulated gripping
surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord. Cutting accessory contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products must not
be disposed of with household
waste. Please recycle where
facilities exist. Check with your local
authorities or retailer for recycling
advice
Before any work on the machine
itself, pull the mains plug from the
socket outlet.
Wear protective gloves
Hammer drilling
Drilling
Wood
Metal
Plastic
Concrete
Masonry
High speed
Low speed

Worx WX317.2 Specifications

General

Drilling	Yes
Chuck type	-
Product color	Black, Orange
Input power	600 W
Power source	AC
AC input voltage	230-240 V
AC input frequency	50 Hz
Impact rate	48000 bpm
Rated speed (max)	3000 RPM
Drilling diameter in wood (max)	25 mm
Drilling diameter in concrete (max)	13 mm

Weight and Dimensions

Weight	2100 g