Worx WX641 Manual

9
Finishing Sander EN
TECHNICAL DATA
Type WX641 WX641.1 WX642 WX642.1 (635-644-designation of machinery, representative of
finishing sander)
WX641 WX641.1
WX642 WX642.1
Voltage 230-240V~50Hz
Power Input 250W 270W
No-load speed 12000/min 6000-12000/min
Base size 90x187mm
Orbital diameter 1.6mm
Protection class
/ll
Machine weight 2.0kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 83dB(A)
A weighted sound power L
wA
: 94dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
Typical weighted vibration
Vibration emission value a
h
= 6.341 m/s2
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a preliminary
assessment of exposure. .
WARNING The vibration and noise emissions during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used especially what kind of workpiece is
processed dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions.

Worx WX641 Specifications

General

Product color	Black
Type of sander	-
Power	250 W
Maximum paper size	93 x 230 mm
Idle oscillation rate (max)	12000 OPM
Number of sandpapers	6
Power source	AC

Weight and Dimensions

Weight	2000 g
Sanding plate size (WxD)	90 x 187 mm