Worx WX641 User Manual

7
Finishing Sander EN
TECHNICAL DATA
Type WX641 WX642 (635-644-designation of machinery, representative of finishing
sander)
WX641
WX642
Voltage 230-240V~50Hz
Power Input 250W 270W
No-load speed 12000/min 6000-12000/min
Base size 90x187mm
Orbital diameter 1.6mm
Protection class
/ll
Machine weight 2.0kg
NOISE INFORMATION
A weighted sound pressure L
pA
: 82.3dB(A)
A weighted sound power L
wA
: 93.3dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection when sound pressure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
Vibration emission value a
h
= 5.391m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed

Worx WX641 Specifications

General

Product color	Black
Type of sander	-
Power	250 W
Maximum paper size	93 x 230 mm
Idle oscillation rate (max)	12000 OPM
Number of sandpapers	6
Power source	AC

Weight and Dimensions

Weight	2000 g
Sanding plate size (WxD)	90 x 187 mm