16. Only use paper in good condition. Do not
use torn or worn paper.
17. Do not sand material containing asbestos
due to a health risk.
18. Do not sand lead based paint due to the
risk of lead poisoning.
19. Do not eat or drink in the working area of
the sander.
20. Do not allow people to enter the working
area without wearing a dust mask.
21. Where possible, seal off the working area
to contain the dust for later removal.
22. Your tool is designed for dry sanding only,
not wet sanding.
23. Your tool is designed for general purpose
light polishing of wood and metals.
24. Do not sand magnesium material due to
the risk of fire.
WARNING: Some dust particles
created by power sanding, contain
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
• Leadfromlead-basedpaints.
• Crystallinesilicafrombricksandcement
and other masonry products.
• Arsenicandchromiumfromchemically
treated lumber.
Your risk from these exposures varies,
depending upon how often you do this type
of work.
To reduce your exposure to these chemicals:
• Workinawell-ventilatedarea.
• Workwithapprovedsafetyequipment,
such as those dust masks that are specially
designed to filter microscopic particles.
To reduce the risk of injury, user
must read instruction manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
RCM approval mark
SYMBOLS
To Next Page
Loading...
Need help?
General
