5-in-1 Multi Sander EN
8
1. HYPERLOCK
TM
ACCESSORY
CLAMPING LEVER
2. ON/OFF SWITCH
3. HANDLE
4. HYPERLOCK
TM
RELEASE BUTTON
5. BATTERY PACK RELEASE BUTTON*
6. BATTERY PACK*
7. PLATE INTERFACE
8. VARIABLE SPEED DIAL
9. DUST BAG
10. FINISHING PLATE
11. RANDOM ORBIT PLATE
12. DETAIL PLATE
13. FINGER PLATE
14.
CONTOUR PLATE
15. PAPER PUNCH
*Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type Designation WX820L WX820L.9
(82-designation of machinery,
representative of Multi Sander)
WX820L WX820L.9
Voltage
20 V Max**
No-load speed 4000-10000 /min
Orbital diameter
Random orbit-3/32”,
Finish-1/16”, Detail-1/16”
Speed settings 1-6
Machine weight
4.4lbs 3.3lbs
** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
ACCESSORIES
WX820L WX820L.9
Battery
pack(WA3525)
1 /
Charger(WA3742)
1 /
Finishing plate 1 1
Random orbit
plate
1 1
Detail plate 1 1
Finger plate 1 1
Contour plate 1 1
Dust bag 1 1
Paper punch 1 1
4 1/2" x 5 1/2"
Finishing
sanding paper
3 3
5" Random
orbit H&L
sanding paper
3 3
5 1/2" x 3 1/2"
Detail H&L
sanding paper
3 3
3" x 1 13/64"
Finger H&L
sanding paper
3 3
3 3/8" x 2"
Contour H&L
sanding paper
3 3
Only use the appropriate accessories intended for
this tool. Accessory information can be found on
the product packaging, at a WORX dealer or on
our website at www.worx.com
To Next Page
Loading...
