20V Cordless Detail Sander EN
7
COMPONENT LIST
1.
ON/OFF SWITCH
2.
HANDLE
3.
BATTERY PACK RELEASE BUTTON
4.
BATTERY PACK
5.
DUST BAG
6.
DETAIL PLATE
7.
FINGER PLATE
8.
5-1/2" X 3 1/2" DETAIL H&L SANDING
PAPER*
9.
3" X 1-13/64" FINGER H&L SANDING
PAPER*
*Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type Designation WX822L WX822L.9 (82 -
designation of machinery, representative of
Sander)
WX822L WX822L.9
Voltage
20 V Max**
No-load speed 12000 /min
Plate size 5 1/2" x 3 1/2"
Orbital diameter 5/64“
Machine weight
2.65 lbs 1.77 lbs
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
ACCESSORIES
WX822L
WX822L.9
Battery pack (WA3525) 1 /
Charger (WA3881) 1 /
5-1/2" x 3 1/2"Detail H&L
Sanding Paper
3 3
3" x 1-13/64" Finger H&L
Sanding Paper
3 3
Dust Bag 1 1
Finger Plate 1 1
Only use the appropriate accessories intended for this
tool. Accessory information can be found on the product
packaging, at a WORX dealer or on our website at www.
worx.com.
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
To Next Page
Loading...
