Need help?Do you have a question about the Woson TANCO and is the answer not in the manual?
General| Brand | Woson |
|---|---|
| Model | TANCO |
| Category | Laboratory Equipment |
| Language | English |
Lists European directives and standards the sterilizer complies with.
Provides contact details for the EU representative.
Mentions ISO certifications for the manufacturing facility.
States the original language of the document.
Confirms compliance with medical device directives and CE marking.
Highlights important information for safe and effective operation.
Specifies the types of products and applications for the sterilizer.
States that there are no contraindications for this equipment.
Explains device icons and label symbols used in the manual.
Provides crucial safety guidelines for operating the sterilizer.
Details the protective components of the sterilizer and their functions.
Warns about potential hazards like scalding and pollution during operation.
Lists devices that protect users or the equipment during operation.
Instructions for verifying the product and its packaging upon receipt.
Guides on how to unpack and identify included accessories.
Lists available optional accessories for the sterilizer.
Specifies the ideal environmental conditions and placement for the sterilizer.
Instructions on positioning and setting up the sterilizer on a surface.
Details on how to safely connect the sterilizer to a power source.
Identifies and describes the components visible on the front of the sterilizer.
Identifies and describes the components visible on the rear of the sterilizer.
Shows and describes internal components when the sterilizer is open.
Provides external dimensions for both 8L and 12L sterilizer models.
Shows the internal dimensions for loading instruments for both models.
Lists the technical specifications and operating parameters of the sterilizer.
Illustrates and explains the different stages of the sterilization cycle.
Details the integrated display and function buttons on the control panel.
Explains how to navigate and select sterilization programs via the menu.
Shows the visual progression of a sterilization cycle step-by-step.
Instructions for connecting power and turning on the sterilizer.
Guidance on checking and refilling the distilled water reservoir.
Explains the alarm for a full used water reservoir and how to drain it.
Steps for choosing the appropriate sterilization program from the menu.
Instructions on how to properly arrange instruments on trays for sterilization.
Details the correct procedure for closing and securing the sterilizer door.
Describes the process of initiating a sterilization cycle after setup.
Information on what happens when a cycle finishes and how to unload.
Instructions for safely shutting down the sterilizer after use.
Explains how the system handles interruptions or errors during operation.
Describes the system's behavior and recovery after an unexpected power loss.
A checklist of critical points to confirm before operating the sterilizer.
Lists actions that should be strictly avoided during operation and maintenance.
Outlines the recommended maintenance tasks and their frequency.
Specific cleaning and checks to perform daily for optimal performance.
Tasks for weekly cleaning and upkeep of the sterilizer components.
Procedures for monthly cleaning of the water reservoir and filters.
Instructions for tasks like changing the door gasket, performed as needed.
Steps for preparing the sterilizer for transport or storage.
Instructions on how to drain all water from the unit.
Specifies the required environmental conditions for transport and storage.
Guidelines for packaging the sterilizer for shipment.
A diagram illustrating the hydraulic system of the sterilizer.
A schematic showing the electrical connections and components of the unit.
To Next Page
