WPS pro - WPS Mote Quick Setup; WPS Mote Module Antennas; 3.5 mm Breakout Harness Connection; USB Charging

Have a question? Let us know and we will help.
Email: support@wirelesspyro.co.uk
Phone: +44 (0) 7842 783136
WPS mote quick setup guide
WPS mote has two external antennas – one for radio module and one for
GPS receiver.
Use 3.5mm breakout harness to connect via 2-wire communication or
external trigger input.
Use mini USB cable for charging. Red LED on WPS mote will turn on once
charging and turn off when fuly charged. Charging at max 1A current.