To Next PageTo Next Page
Need help?Do you have a question about the Wright Manufacturing Stander 54700 and is the answer not in the manual?
General| Engine Displacement | 726 cc |
|---|---|
| Cutting Width | 52 in (132.1 cm) |
| Transmission | Hydro-Gear ZT-3400 |
| Fuel Type | Gasoline |
| Cutting Height | 1.5 - 5 inches |
| Engine Type | 4-Cycle |
| Deck Material | 7 ga |
| Wheel Size | 24 x 12-12 (rear) |
Basic rules for safe operation and maintenance.
Guidelines for safe operation by trained personnel only.
Requirements for operators, including age, experience, and physical fitness.
Recommended attire for safe operation to prevent accidents.
Procedures for keeping the mower in safe operating condition.
Checks for hazards in the mowing area before operation.
Essential safety practices to follow before starting.
Precautions to take during repair and maintenance.
Guidelines for safely mowing on inclines and slopes.
Precautions for handling and storing gasoline.
Safety measures for dealing with hydraulic fluid under pressure.
Critical torque values for various mower components.
Explanation of controls for mower operation and steering.
Description of the safety interlock system and its function.
Essential pre-operation checks for safety and functionality.
Step-by-step guide for starting the mower engine.
Procedures for operating the mower's drive controls.
Procedure for testing the blade engagement and braking system.
Testing the safety feature that stops the engine when the operator leaves the platform.
