WTI NPS-2HD - Page 36

2. Switch Plug(s) On: To power-on a plug, type /ON n and
press [Enter]. Where "n" is the number or name of the
desired plug.
Examples:
·
To power-on both plugs, type /ON * and press [Enter].
·
To power-on Plug One, type /ON 1 and press [Enter].
3. Switch Plug(s) Off: To power-off a plug, type /OFF n
and press [Enter]. Where "n" is the number or name of
the desired plug. Note that the "/OFF" command can also
be entered as "/OF".
Examples:
·
To power-off both plugs, type /OFF * or /OF * and
press [Enter].
·
To power-off a plug named POWER2, type
/OFF POWER2 or /OF POWER2 and press [Enter].
4. Suppress Command Confirmation Prompt: To execute a
Boot/On/Off command without displaying the "Sure?"
prompt, include the ",Y" option in the command line. The
",Y" option is entered immediately following the
command argument.
Examples:
·
To boot both plugs without displaying the "Sure?"
prompts, type /BOOT *,Y or /BO *,Y and then
press [Enter].
·
To power-off a plug named POWER1 without displaying
the "Sure?" prompt, type /OFF POWER1,Y or
/OF POWER1,Y and then press [Enter].
6-4
NPS-2HD Heavy Duty Network Power Switch; User's Guide