CoolSpeed mini Air spindles are driven by mist lubricated air.
They provide for very high rotation speeds while maintaining perfect run-out values.
CoolSpeed mini Air is designed to machine the workpiece top surface and perform milling, drilling, chamfering and engraving.
For those machines equipped with through main spindle mist, CoolSpeed mini Air requires no machine adaptations, it fits into
standard – sealed – tool holders, and several CoolSpeed mini Air units may be applied into the machine magazine during the
machine set-up.
For all other machines, an air hose may be adopted externally via a dedicated tool holder.
The CoolSpeed mini Air spindles provide for significant cost reductions, including:
• Longer tool life
• Shorter machining times
• Longer main spindle life
• Freeing machine to perform other tasks
To Next Page
Loading...
