General safety instructions
• Do not touch the cutting tool during rotation, and do not attempt to stop the tool rotation.
• Do not change replacement kits while the tool holder is clamped in the main spindle.
• Do not attempt to operate the CoolSpeed mini while the machine door is open.
• Follow machine instructions at all times (specifically while operating the CoolSpeed mini).
• Only authorized CoolSpeed mini operators are authorized to operate the CoolSpeed mini.
• Do not place your hand or other organs in front of the CoolSpeed mini while in operation.
• Before daily operation, inspect CoolSpeed mini parts status and perfection.
• Avoid inhalation of the emulsion, oil or air during operation. Use a face mask while operation the CoolSpeed mini.
• Follow general safety instructions while operating the CoolSpeed mini – use protecting glasses, work shoos and gloves.
• Avoid loose long hair.
• Avoid long necklaces and other jewelry.
• Use common sense at al times.
To Next Page
Loading...
