FAQs
Problems
Abnormal
flash or
failure
to turn on
Abnormal
noise
Check if the switch is turned on correctly
Check if it is assembled in place
Check if the battery is no power
Check if the battery is reversed
Check if the conductive position is dirty
Check if foreign matter falls in the tube
Part damage
Turn on the switch
Check if the flashlight is lockout Unlock the flashlight
Tighten the assembly parts
Try the battery on other products
Remove the battery andreassemble it
correctly
Clean the surface with alcohol
Pour out possible foreign matterl
Contact your seller
Causes
Solutions
If your problems still not solved yet, please contact WUBEN Headquarter for after-sales service.
- 12 -