Wulken 66002464 - User Manual

ÉTABLI-ÉTAU PLIANT
FOLDABLE WORKBENCH
66002464
ATTENTION :
PRENEZ BIEN CONNAISSANCE DES CONSIGNES DE SÉCURITÉ ET D'UTILISATION CONTENUES
DANS CE GUIDE AVANT DE COMMENCER À UTILISER CE PRODUIT.
CAUTION:
READ AND FOLLOW ALL SAFETY AND USE INSTRUCTIONS IN THIS GUIDE BEFORE USING THIS PRODUCT.
GUIDE D'ASSEMBLAGE
ASSEMBLY GUIDE

Summary

Foldable Workbench Assembly Guide

Safety Instructions

Parts List

Assembly

Step 1

Connect leg frames using braces and leg tips, ensuring correct orientation.

Step 2

Attach table tops to the leg frames using slide bases and screws.

Step 3

Secure cross bars to the leg frames using bolts, nuts, and washers.

Step 4

Attach the second table top assembly to the leg frames.

Step 5

Insert chocks to secure the unfolded workbench for stability.

Product Usage

Opening and Setup

Fully open the workbench, ensuring legs are extended and braces are horizontal.

Adjusting Table Tops

Turn cranks to adjust table tops to desired positions or use as a vise.

Folding for Storage

Fold the workbench by bending braces upward and pushing leg frames together.

Limited Warranty Information

Wulken 66002464 Specifications

General

Brand	Wulken
Model	66002464
Category	Tool Storage
Language	English