CRU-XP
Universal controller
CRU-XP_V1.70_PI_2019-04_EN Subject to technical changes Page 3 of 4
Circuit diagram
Installing and connecting
Danger to life from electric shock and/or fire!
Switch power off to the entire plant when installing and wiring. Otherwise a mains
voltage and/or external voltage may still be present even if the control voltage is
switched off. Always remove both power plugs (L and N).
This device is designed for top-hat rail
installation. The housing is a standard size and is
also suitable for installation in fuse boxes.
The devices can be positioned next to one
another without gaps.
To Next Page
Loading...
