19
5HVLGXDO5LVNV
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual
risk factors. The operator should pay particular and
additional attention to these points in order to reduce
the risk of serious personal injury.
˟ Injury to hearing – Wear suitable ear protection
and limit exposure.
˟ Injury to sight – Wear protective eye shields or
goggles when using the product.
˟ Injury caused by vibration – Limit exposure and
follow the instructions on risk reduction in this
manual.
˟ Electric shock after contact with hidden wires –
Hold the product only by insulated surfaces.
˟ Respiratory injury from dust created by operating
the product – Wear suitable protection depending
on type of dust.
7RRO6SHFLÀFDWLRQV
Cordless drill driver ABS 18
COMPACT
Article number 5701 800 X
Voltage 18 V
Chuck 1.5 - 13 mm
No load speed (drill mode)
Gear 1 0-600 min
-1
Gear 2 0-1900 min
-1
Clutch (positions) 23 + drill mode
Maximum torque 60 Nm
Maximum drilling capacity in
wood
40 mm
Maximum drilling capacity in
metal
13 mm
Weight (According to EPTA
procedure 01/2003)
1.9 kg
Weight - not incl. battery pack 1.2 kg
Ambient operating temperature
for the tool and battery pack
0 - 40°C
Ambient storage temperature
for the tool and battery pack
0 - 27°C
Recommended ambient
charging temperature
5 - 40°C
Recommended battery type LI 18V/4Ah
BASIC
Recommended charger ALG 18/4
BASIC
Know Your Product
See page 3.
1. Keyless chuck
2. Torque adjustment ring
3. Gear selector
4. Direction of rotation selector
5. Trigger switch
6. Handle, insulated gripping surface
7. LED light
8. Battery pack
9. Belt clip
Intended Use
The drill driver can be used for drilling into various
materials, including wood, metal, and plastics using a
drill bit having a shank diameter of less than 13 mm.
The product can be used to drive and remove screws
and bolts using an appropriate bit.
For damage caused by usage other than intended, the
user is responsible.
Symbols
Read all safety warnings and all
instructions.