17
Tool Specifications
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-1, EN 60745-2-2.
Typically the A-weighted sound pressure level of the product
is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-1, EN 60745-2-2:
Drilling into metal: a
h
<2.5 m/s
2
, K=1.5 m/s
2
Screwdriving without impact: a
h
<2.5 m/s
2
, K=1.5 m/s
2
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or insertion tools or
is poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Cordless Drill/Driver BS 12-A
MULTI
BS12-SB 10 BS12-
BV 1/4''
BS 12-WB BS12-
EV 1/4''
Art. No. 5700 121
X
5700 121
001
5700 121
002
5700 121
003
5700 121
004
Rated voltage V=12––––
No-load speed
–1st gear
– 2nd gear
min
-1
min
-1
0 – 400
0 – 1300
–
–
–
–
–
–
–
–
Max. torque for soft screwdriving
application according to
ISO 5393 Nm 15
*
––––
Maximum torque, hard screwdriv-
ing application according to
ISO 5393
Nm 30
*
– – – –
Maximum drilling diameter
(1st/2nd gear)
– Wood
–Steel
mm
mm
19
10
–
–
–
–
–
–
–
–
Max. screw dia. mm 7 – – – –
Tool holder 6.35 (¼") 1 – 10 6.35 (¼") 6.35 (¼") 6.35 (¼")
Weight according to EPTA-
Procedure 01:2014
kg 0.8 – 1.1* 0.2 0.1 0.3 0.3
Permitted ambient temperature
– during charging
– during operation
**
and during
storage
°C
°C
0 ... +45
– 20 ... +50
–
–
–
–
–
–
–
–
Recommended batteries AKKU-LI-
12V/X.X Ah
– – – –
Recommended chargers AL 30-LI––––
* Value dependent of the battery pack being used
** limited performance at temperatures <0 °C
OBJ_BUCH-3342-001.book Page 17 Thursday, December 14, 2017 9:18 AM
To Next Page
Loading...
