To Next PageTo Next Page
Need help?Do you have a question about the Würth master K 290 and is the answer not in the manual?
General| Brand | Würth |
|---|---|
| Model | master K 290 |
| Category | Air Compressor |
| Language | English |
Defines the intended use of the machine for generating compressed atmospheric air for commercial and industrial purposes.
Instructions for installing the compressor in a suitable environment, considering temperature and dust.
Guide for connecting compressed air leads, adjusting working pressure, and using quick couplings.
Steps for safely starting the compressor, including information on automatic pressure relief.
Procedure for cleaning or replacing the suction filter element for optimal performance.
Procedure for safely draining condensation from the reservoir and pressure reducer.
Instructions for changing the compressor oil, including necessary precautions and oil type.
General care instructions for cleaning cooling fins and sight glasses.
Frequency for checking the oil level before operation.
Recommended frequency for cleaning the intake filter.
Troubleshooting steps for when the compressor does not start, including motor protector and mains voltage issues.
Diagnosing issues when the compressor runs continuously, such as dirty filters or overloads.
Troubleshooting for compressors that run for a short time then switch off automatically.
Resolving issues where compressed air escapes through the relief valve at standstill.
Addressing problems where compressed air escapes through the relief valve during operation.
Identifying causes for frequent compressor cycling, such as condensation or overload.
Troubleshooting for the safety valve blowing off, related to reservoir pressure.
