Würth POWERQUAD M - For Your Safety; Safety Instructions

8
Note
Modication of the device or manu-
facturing of additional devices is not
permitted. Such modications can re-
sult in personal injury or malfunctions.
■ Only appointed and trained personnel may
carry out repairs to the device. For such
purposes, always use original spare parts
from Adolf Würth GmbH & Co. KG. This will
ensure the continuing safe operation of the
device.
Warning
Do not look directly at the lamp
when it is switched on - Risk of eye
injuries!
Attention
The luminous elements of the lamp
cannot be changed by the user.
■ Socket load:
Observe the information on the type plate!
■ Use only original Würth accessories
and spare parts.
Note on the use of lamps with
'
-mark according to EN60598-2-24
IP 4x
Environment without dust deposition
IP 5x
Environment with deposition of non-electrically conducting
dust
IP 6x
Environment with deposition of electrically conducting dust
For Your Safety
Please read and comply with this
instruction manual prior to rst use of
your device.
Keep these operating instructions for
later use or for a subsequent owner.
WARNING - Prior to rst use
always read the Safety instruc-
tions!
Failure to observe the instruction manual and the
safety instructions could result in damage to the
device and danger for the operator and others.
Safety instructions
GB