To Next PageTo Next Page
Need help?Do you have a question about the Würth WSS 225-E Compact and is the answer not in the manual?
Read all safety warnings and instructions. Failure to follow may result in injury.
Follow safety warnings for this power tool to avoid electric shock, fire, or injury.
Use recommended accessories, ensure correct speed/diameter, and check for damage before use.
Understand kickback causes and use firm grip/proper body positioning to resist forces.
Use care with corners/edges, avoid snagging, and do not use incompatible blades.
Keep tool dry, check cables, use outdoor extension cords, and use original accessories.
Details authorized applications for the sander, excluding cutting, grinding, flap discs, and wire brushes.
Lists the main components and parts of the wall and ceiling sander.
Provides technical data including article number, voltage, power, speed, and dimensions.
Steps to dismount the sanding head and exchange the Velcro or support plate.
Procedure for centering and attaching a sanding sheet to the Velcro plate.
Guide on how to remove and replace the brush collar on the sanding head.
Instructions on how to remove worn corner protectors and install new ones.
Connects the vacuum hose to the sander for dust extraction.
How to start, lock, and stop the machine using the On/Off switch.
Setting the desired speed using the thumbwheel for different applications.
Tips for efficient dust extraction, handling, and sanding techniques.
Explains the brush collar's role in surface protection and dust containment.
Techniques for sanding drywall, focusing on pressure and movement for finish.
Health risks of dusts and importance of proper dust extraction and ventilation.
Essential steps for keeping the machine clean and in good working order.
Information on obtaining repairs, ordering spare parts, and finding parts lists.
Details the warranty conditions and coverage provided for the power tool.
Environmental guidelines for disposing of the machine, accessories, and packaging.
Specific disposal instructions for EC countries under EU waste directives.
Presents measured noise and vibration levels according to EN 60745 standards.
Specific vibration emission values for surface sanding and their comparison.
States the product's conformity with relevant EU standards and directives.
General