Need help?Do you have a question about the WYLER Clinotronic PLUS and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Type | Electronic Inclinometer |
| Resolution | 0.01 degrees |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -10 to 60 °C |
| Interface | RS232 |
| Measurement Range | ±45 degrees |
Introduces the electronic inclinometer +CLINO PLUS+ and its predecessor.
Describes the concept, housing, components, and measuring principle of the +CLINO PLUS+.
Advises to study operating instructions before first use for proper operation.
Provides a visual overview of the +CLINO PLUS+ operating elements and their functions.
Explains the detailed functions of the ON/MODE, ENTER/HOLD, and SELECT/PRINT keys.
Explains battery test, change procedures, and instrument function verification.
Details the process for setting the absolute zero point for accurate measurements.
Explains how to change measurement units and configure relative base settings.
Describes the HOLD function to freeze readings and the PRINT function for data output.
Covers instrument reset procedures and data transmission via RS485.
Details how to perform absolute inclination measurements with the instrument.
Explains the procedure for relative inclination measurements against a reference.
Describes measuring angles beyond sensor capacity using different instrument bases.
Provides instructions on how to properly turn off the instrument.
Lists general technical specs: range, errors, resolution, temp. coeff., battery.
Details data transfer, pin definitions, and connector types for PC communication.
Explains connection modes, polling, data exchange, and data frame structure.
Provides examples of command/response data frames for +CLINO PLUS+ mode.
Explains the process of recalibrating the instrument using external equipment.
Lists available accessories and spare parts for the instrument.
Advises on the correct storage position to prevent zero point drift.
Provides guidelines for battery care, handling, and replacement.
Wiring diagrams for connecting to remote button and computer via RS485.
Wiring diagrams for connecting to computer via RS232.
Wiring diagrams for connecting to computer via CMOS +5V interface.
Wiring diagrams for connecting to computer via RS422 interface.
Details options for attaching the instrument with magnets or threaded holes.
Describes the CLINOMASTER tool for calibrating the CLINOTRONIC instrument.
Details the Express Repair Service for faster instrument repair and return.
To Next Page
